Get a competitive quote for your Teesside pressure washing

Get a free, competitive quote for cleaning your drive, patio, roof, render or decking, whatever its size or condition. Covering Middlesbrough, Stockton, Billingham, Redcar, Hartlepool and Yarm, with a fast turnaround on quotes.

  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ Fast turnaround
  • ✓ All TS postcodes covered
Worker in protective overalls pressure washing a concrete surface

Pressure washing services in Teesside

Get a free, competitive quote for driveway, patio, roof or render cleaning. Clear pricing, fast turnaround.

How it works

  1. Tell us what needs cleaning. Two minutes in the quote form, the surface and roughly how big, how dirty, postcode.
  2. Get your free quote. Your job is priced properly and competitively, with a fast turnaround.
  3. You decide. Talk the quote through, ask questions, take your time. No charge, no pressure.

How much does pressure washing cost in Teesside?

A typical Teesside driveway clean costs £90 to £250, depending on size, surface and how far gone it is. Patios run at similar rates, roughly £3 to £6 per square metre. Roof soft washing and biocide treatment is the premium job at £8 to £15/m², and render cleaning sits at £5 to £10/m². Oil stain treatment and re-sanding or sealing block paving add to the total.

The honest answer is that price follows condition: a drive that has not been cleaned in a decade, with established black spot lichen on the slabs or moss packed between the blocks, takes longer and uses more chemical than one cleaned every couple of years. The only accurate price is one based on your surface, which is why quotes start with the details of the job.

Typical Teesside pressure washing prices (2026)
JobGuide priceNotes
Driveway cleaning£3 to £6/m²Typical drive £90 to £250
Patio cleaning£3 to £6/m²Black spot treatment extra
Roof soft wash & biocide£8 to £15/m²Never high pressure on tiles
Decking cleaning£4 to £7/m²Low pressure, wood-safe
Render & wall cleaning£5 to £10/m²Soft wash only on render

Full breakdowns, including the extras worth paying for, are in our Teesside pressure washing cost guide.

High pressure is not always the answer

The machine is only half the job; knowing when not to use it is the other half. Block paving and concrete take rotary surface cleaners well. But render, roofs and decking are damaged by high pressure: it strips the coloured face off render, lifts the protective granules off concrete tiles and furs up timber decking so it drinks water and rots faster.

Those surfaces need soft washing: low-pressure application of a biocide solution that kills the algae, lichen and moss at the root rather than blasting the top off it. In Teesside's damp climate, where north-facing walls go green or red with algae within a couple of winters, a soft wash with a residual biocide lasts far longer than a pressure wash alone. Our pressure washing vs soft washing guide explains which method suits which surface.

What good looks like

Every quote follows the same standard, and these are the four things worth asking for whoever you choose:

Built for Teesside conditions

Teesside exteriors take a particular beating. The damp air off the North Sea feeds algae on every shaded surface, and the exposed coast at Redcar and Seaton Carew adds salt spray that streaks render and weathers block paving faster. The 1930s semis of Acklam, Linthorpe and Hartburn typically have north-facing drives where moss thrives, the new-builds at Wynyard and Ingleby Barwick suffer red algae streaking on fresh k-render, and Indian sandstone patios everywhere from Yarm to Hartlepool grow the stubborn black spot lichen that a domestic jet wash will not shift. Read more about the site, or get your quote started above.

Get a competitive quote for your Teesside pressure washing

Competitive pricing, quoted properly for your job. No charge, no pressure.

Get Quote
  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ All TS postcodes covered

Where we cover

We cover the whole Teesside conurbation, from the Redcar seafront to the Wynyard estates.

Full details on the areas we cover page.

Frequently asked questions

How much does pressure washing cost in Teesside?
Driveways and patios run £3 to £6/m², so a typical drive costs £90 to £250. Roof soft washing is £8 to £15/m², decking £4 to £7/m² and render £5 to £10/m². Condition drives the price: black spot, oil stains and heavy moss add treatment time.
Will pressure washing damage my surface?
Not when the method matches the material. Block paving, concrete and imprinted concrete clean well under pressure. Render, roofs and decking need soft washing at low pressure; high pressure on those strips finishes, lifts tile granules and scars timber. A good contractor chooses the method per surface.
What is the black spot on my patio slabs?
A lichen that anchors into the pores of the stone, common on Indian sandstone across Teesside. Pressure alone will not remove it; it needs a dedicated black spot treatment, usually a sodium hypochlorite based product, applied and left to work before washing.
Should block paving be re-sanded after cleaning?
Yes. Washing blasts out the kiln-dried jointing sand, and without it the blocks shift and weeds return fast. Re-sanding once the paving is dry is standard on a proper job, and sealing afterwards is an optional extra that slows regrowth.
Is the quote really free?
Yes. Describe the job in the form, get a written quote, and decide in your own time. No charge and no pressure.

Pressure washing guides for Teesside homeowners

Get a competitive quote for your Teesside pressure washing

Competitive pricing, quoted properly for your job. No charge, no pressure.

Get Quote
  • ✓ Free quotes
  • ✓ Competitive pricing
  • ✓ All TS postcodes covered